|
|
 |
Welded steel structure.
The operation of the machine is based on tilting
table principle. The clamping of plate is done through pressing down the
arm of eccentric. The workpiece stays clamped until the arm is pulled up.
The thickness of plate, the sharpness of bent edge and the position of
clamping edges are adjustable with arrester.
Both stands of the machine are detachable,
and you can easily fit them back when needed (the machine with size of
0,5 m is made without stands, you can mount it on a table or fix in vice).
Due to it's small size, and low weight it
is easy to convey.
A manual double roller blade shear ("KGO")
is adaptable to the machine (extra charge). |
Technical
data
|
PILLE/0,5m
|
PILLE/1m
|
PILLE/2m
|
| Bendable plate thickness (400N/mm2) |
1 mm
|
0,8 mm
|
0,6 mm
|
| Useful lenght (changeable) |
500 mm
|
1005 mm
|
2005 mm
|
| Clamping edge (changeable) |
15°
|
15°
|
15°
|
| Tilting table (changeable) |
15 mm
|
15 mm
|
15 mm
|
| Height of opening |
50 mm
|
50 mm
|
50 mm
|
| Weight |
30 kg
|
60 kg
|
120 kg
|
Draft
 |
|
