|
|
|
The machine built
on a steel-shell, the shafts turn in needle-roller bearing.
The shafts are placed vertically.
The bearing pulley is adjustable
ahead till the edge of the pressure pulley.
The column contains the electric
case.
You can start up the machine in
both directions with a low voltage pedal contact.
The table of the machine is adjustable
(80mm) uprightly. It is possible to adjust stage less the distances of
the rolls with pneumatic work roll, where the control happens with a pneumatic
footswitch. The regulation of the revolution number is stage less. |
|
Technical data
|
FZ
|
| Max. plate thickness (400N/mm2) |
2 mm
|
| Roller diameter |
60 mm
|
|
|
