|
|
Welded steel
structure.
The operation of the machine
is based on tilting table principle. The fixing of plate is done through
pressing down the arm of eccentric. The workpiece stays clamped until the
arm is pulled up.
The moving up of upper bridge
is linear motion, a gas telescope balances its movement, making the operation
extremely easy.
Springy links assist the lifting
up of the tilting table
The thickness of plate, the
sharpness of bent edge and the position of clamping are adjustable with
arrester.
Shared sections only on the
depression beam in basic case.
It is possible to order separate
manual adjustable rear back-stop table from 5 to 1000mm in options. |
Technical data
|
XES/1m
|
XES/1,25m
|
XES/1,5m
|
XES/2m
|
XES/2,5m
|
XES/3m
|
Bendable plate thickness
(400N/mm2) |
2,2 mm
|
2 mm
|
1,75 mm
|
1,5 mm
|
1,25 mm
|
1 mm
|
Useful lenght (changeable) |
1020 mm
|
1270 mm
|
1520 mm
|
2020 mm
|
2520 mm
|
3020 mm
|
|
|